Research on the Parameters of Gasoline Engine Injectors
Technological Sciences
Giedrius Brunius
Šiaulių valstybinė kolegija, Transporto inžinerijos katedra
Arturas Sabaliauskas
Šiaulių valstybinė kolegija, Transporto inžinerijos katedra
Published 2021-08-31
https://doi.org/10.15388/JMD.2021.7
PDF
HTML

Keywords

gasoline injectors
droplet size
mass flow rate

How to Cite

Brunius G. and Sabaliauskas A. (2021) “Research on the Parameters of Gasoline Engine Injectors”, Jaunųjų mokslininkų darbai, 51(1), pp. 78-87. doi: 10.15388/JMD.2021.7.

Abstract

Automotive engines are getting more and more advanced. This causes the change in the development of injectors. The nozzle spray fuel quality has to meet certain requirements, such as sprayed droplet size, flare length, and sprayed fuel.  Using the method of analysis and synthesis of scientific literature sources, the main parameters of gasoline injectors were calculated in this work. The results of the research have been compared with calculated parameters obtained from the injectors test stand.
The paper has been prepared on the basis of G. Brunius’ Master Thesis.

PDF
HTML
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)