Simulation of nuclear reactor control and protection system
Articles
Evaldas Bubelis
Lithuanian Energy Institute
Narimantas Listopadskis
Kaunas University of Technology
Raimondas Pabarčius
Lithuanian Energy Institute
Published 2004-12-17
https://doi.org/10.15388/LMR.2004.32228
PDF

Keywords

reactor
control and protection system
RBMK
simulation

How to Cite

Bubelis, E., Listopadskis, N. and Pabarčius, R. (2004) “Simulation of nuclear reactor control and protection system”, Lietuvos matematikos rinkinys, 44(spec.), pp. 696–702. doi:10.15388/LMR.2004.32228.

Abstract

Ignalina NPP RBMK-1500 reactor control and protection system (RCPS) logic, which was implemented in code QUABOX/CUBBOX-HYCA, is described in the paper. Analysis of numerical simulation results shows, that logic of RBMK-1500 RPSS is adequate to logic as described in technical literature. Simulation results obtained by code QUABOX/CUBBOX-HYCA were compared with simulation results obtained us­ing STEPAN code. The conclusion was made that RCPS operation sequences and response are analogical. The complement the code QUABOX/CUBBOX-HYCA with full realistic RCPS logic allows to simulate the transient processes and accidents, which have place in the reactor core of Ignalina nuclear power plant.

PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Downloads

Download data is not yet available.

Most read articles by the same author(s)

1 2 > >>